| 1. | He derived the observed intensity distribution of light emitted by a hot solid .
他导出了观察到的热体发光的强度分布。 |
| 2. | Energy efficient and an even distribution of light
高效节能，光线平和，照射均匀 |
| 3. | For multi - beam combined sources , the distribution of light absorption is influenced by the distance between beams obviously
多束组合光源光束间距对光吸收分布影响很大。 |
| 4. | In this thesis , we introduce and validate that the uniformity of the distribution of light intensity on slm could be improved availably utilizing multiple beam
本文提出并验证了通过多光束并束可以有效地改善激光束对slm光照的均匀性。 |
| 5. | 1 the spectral power distribution of light from fluorescent uv lamps is significantly different from that produced in light and water exposure devices using other light sources
在光和水老化设备中所用的紫外荧光产生的光的光谱能量分布与别的光源有着显著差异。 |
| 6. | As a result of interference of light , the spectrum distribution of light will change in some condition when it pass through some medium , and the change is determined by the parameter of the medium
利用光谱仪测量干涉后的光谱分布，再结合优化算法拟合测量光谱曲线，反演出光学介质的某些未知物理参数。 |
| 7. | The advantage of the simulation system is as following : by adjusting the experiment ' s parameters arbitrarily , the distribution of light intensity and the design of fraunhofer diffraction can be observed and analyzed
仿真实验的特点是：通过改变可调参数，得到相应的实验现象，方便于分析各种衍射屏的衍射特点。 |
| 8. | First , single led is analysed and disposed approximately to build the mathmatical model , light energy of one point on screen is calculated by algebraic addition , then the distribution of light energy on the whole area of screen is deduced
首先对单个发光二极管进行分析，对其做近似处理，建立数学模型，用代数叠加的方法来推导光幕面内某一点的光能量。 |
| 9. | Through comparing the distribution of energy in biological tissue generated by single and multi - beam as well as flat and gaussian light , influence of various light sources and the light spot size on the distribution of light absorption is analyzed
通过比较单束以及多束均匀分布光和高斯分布光照射下组织内的光子能量分布规律，分析了不同光源和光斑大小对光吸收分布的影响。 |
| 10. | The analysis result indicates that , kdp crystal mechanics characteristics , such as young ’ s modules , shear modules , rigidity and so on , have intense anisotropy , which is the reason of the scallop distribution of light and shade appearing on
结果表明, kdp晶体材料的力学特性如弹性模量、剪切模量、硬度等具有强烈的各向异性特征,这种各向异性特征是单晶脆性材料超精密切削后产生明暗相间扇形分布的根源,是影响加工表面质量的重要因素。 |
